RECORDING VIDEO
01. Insert the memory card at the given slot (expandable up to 16GB, The micro SD card should be inserted with the gold contacts facing up in the direction of the control button.Before inserting a micro SD card, make sure the card is formatted correctly. )
02. Place the Spy Keychain Camera where it will get a clear view and audio of what you want to record.
03. Press POWER ON/OFF BUTTON for 3-4 seconds till light on.
04. From standby mode, hold down the RECORD BUTTON for about 3-4 seconds. The LED will flash quickly 3 times and go out to indicate that the device has started recording.
05. To stop recording, press the RECORD BUTTON again and the device will return to standby mode.
06. Press POWER ON/OFF BUTTON to turn off.
TAKING PHOTO’S
01. Press POWER ON/OFF BUTTON for 3-4 seconds till light on.
02. To take a photo, press the RECORD BUTTON. The LED will blink once to indicate that a photo has been stored.
03. Press POWER ON/OFF BUTTON to turn off.
VIEWING YOUR FILES
To view your files on a computer, simply connect the device via the supplied USB cord with the micro SD card inserted into the device, making sure the device is powered Off. It will connect as a removable drive, and depending on the settings on your PC, it may automatically notify you that new hardware has been detected. If so, select Open Folder to View Files.
If it is not automatically detected, click Start on your desktop. Select My Computer if you are using Windows XP, or Computer if using Windows Vista or Windows 7. The device should be listed as a Removable Disk under the Devices With Removable Storage section.Open that drive, which will contain a folder called DCIM. Within the DCIM folder will be another folder named 100MEDIA. This folder will contain all your recorded files.
