How to Use Spy Pen Camera

GETTING STARTED SPY PEN CAMERA

Charge the internal battery before first use.

01. Turn off Video Spy Pen.

02. Unscrew the pen to reveal the USB.

03. Plug the USB into your computer's USB 2.0 port.

04. While the battery is charging, the working Status LED will blink yellow.

05. When charging is complete (3.5 hours), the light will revert toa steady blue.

06. Remove the USB from your computer.

IMPORTANT: Do not overcharge the battery. Battery should be completely charged in 3.5 hours. Do not leave the unit plugged in to the USB for more than 5 hours.

RECORDING VIDEO

01. Turn Mode switch to left side.

02. Place the Spy Pen Camera where it will get a clear view and audio of what you want to record.

03

. Press the RECORD ON/OFF BUTTON on the top of the pen for 5 seconds.

04. The working Status LED will illuminate amber and after 5 seconds will blink blue to indicate recording   has started.

05. While recording, you may want to save sections of video to the pen’s internal memory.

06. Press the RECORD ON/OFF BUTTON to save. Please note that the length of file recorded will affect the time it takes to save. The working Status LED will revert to yellow when saving is complete.

NOTE:

The Video Spy Pen cannot record while saving a file.

TAKING PHOTO’S

01. Turn Mode switch to right side.

02. Press power on/off button gently for 2 seconds.

03. Yellow light will appear on indicator.

04. After 3 to 4 seconds blue light will appear that means Super

Spy Pen is ready to take photo.

05. Click power on/off button to take photo. You can click power on/off button multiple times to take multiple photos.

06. To stop Photo mode press power on/off button again for 2 seconds.

07. Light will off from indicator means photo mode stopped.

 

PLAYING RECORDED FILES

01. Unscrew the pen to reveal the USB.

02. Plug the USB into your computer's USB port.

03. Locate the removable disk drive on your computer. The drive letter will vary by computer.

04. Open the folder to which you downloaded files ( DCIM folder).

05. Double click on the video you want to play. The video will open in Windows

07. You may then resume recording by pressing the RECORD ON/OFF BUTTON. The working Status LED will revert to blinking blue again to indicate it has begun to record again.

Note: If you press the REC ORD ON/OFF button for 5 seconds and the working Status LED light blinks 4 times and the unit shuts off, the memory is full.

For more information visit http://www.anandindiaspycameras.com/

or you can watch our video http://youtu.be/zZKuq-8_8rc